Trying to figure out why your new IPS monitor is glowing? This indicates that you are witnessing the well-known IPS glow phenomena. However, this is one of the few drawbacks of this otherwise excellent display. While your new screen may make your photos look stunning, you may also notice this terrible side effect. It’s possible that certain models have a more noticeable IPS glow, while others are virtually undetectable to the naked eye.

What is IPS Glow?

The IPS glow should not be confused with the backlight leaking. This is a prevalent issue with in-plane switching (IPS) displays, as the name suggests. It appears that the light is “glowing” in certain areas of the room. It can look as though the colors have been distorted in some parts of the image. However, the effect is different depending on how close or far away you are from the monitor, as well as the angle at which you are looking at the screen. This is a direct result of the technology that is utilized by the monitors, and the intensity of the light varies significantly between various models.
On the other hand, the phenomenon known as backlight bleed is caused by the light source that is situated behind the screen of the monitor. In its default configuration, an LCD panel will be completely dark once the backlight is turned off. Light is allowed to pass through spaces that are not completely closed off. The term for this effect is called “backlight bleeding,” and it may typically be noticed around the screen’s edges. It will appear as though the screen has some light areas rather than being completely dark throughout.
Neither of these issues is insurmountable, and neither should prevent you from purchasing an LCD or an IPS display. This is due to the fact that the problem varies according on the model and the brand, and it is most apparent when there is low lighting in the room (and the brightness settings are set way up). The glow also appears to be slightly brownish, yellowish, grayish, or light blue in color, however this could vary from one particular unit to the next.

Can You Test A Monitor For IPS Glow?

How can you be sure that this issue will not affect your brand-new screen, given that IPS displays are known to occasionally experience this kind of issue? After all, if it turns out to be a significant problem, you can send it back right away instead of being forced to use a brand new IPS monitor that has poor IPS glow.
In order to test it, make sure the screen on the monitor is completely black, and reduce the brightness of the lights in the room (lamps, as well as light from outside). The more darkness there is in the room, the more easily you will be able to discern the light of the IPS. You should also test the monitor in regular lighting, because some models have such severe problems with IPS glow that you can see it even when the room is well lit. You can test the monitor in normal lighting by yourself. When you see the light in these settings, you really ought to think about getting a replacement display or getting your money back if you purchased the monitor.

What Happens When Your Monitor Has IPS Glow?

It is extremely common for owners to discover the IPS glow on their monitors after it is too late to return them or get them changed. In addition, the glow does not always appear to be so severe that there is nothing that can be done about it. Your display may be suffering from a minor case of IPS glow. Then you can put these tips and strategies to use to cut it down.

1. Increase The Ambient Lights

The darker the room, the more obvious the IPS glow appears. So the easiest thing to do is to brighten the room where the screen is being used. Plus, you can view the black levels of the gaming monitor, and the contrast appears more prominent.

2. Make The Right Monitor Adjustments

If you use your IPS monitor in a dark room, then you have to use the right monitor adjustments. This means to set it up at the right height and tilt. The best thing you can do is to open a test video in a darker environment, then adjusting the height and tilt until you find the right position where the glow is least visible.

3. Lower The Brightness

Many people set their screens at the highest brightness settings (or higher than 80 in the OSD) but setting this lower can have the biggest effect on IPS glow. The ideal setting is somewhere around 120 cd/m. It will be a change in the beginning, but you will easily get used to the new settings. Plus, your eyes will find a lower brightness better, and the contrast will improve.

4. Massage The Screen With A Microfiber Cloth

While this is not a proven fix, some people online promise that it helps. All you need is a microfiber cloth and massage the screen’s edges for about 20 to 30 minutes. It might not work on everyone, but trying it out wouldn’t hurt.

5. Set The Monitor A Little Bit Further

Increasing the distance between you and the screen may lead to the panel appearing smaller, but this is a good step if the IPS glow is really bothering you. You can even try mounting the monitor on the wall or just leaning back in your chair. For best results, go for a distance between 80 and 120 cm away from the monitor. The farther you are, the less you can see the glow.

6. Loosen The Panel Frame Construction

This is the most challenging step and should be done very carefully. And never use credit cards to loosen the panel frame to avoid making these two mistakes. The first is that you might end up losing the inner panel frame out of the metal, leading the outer panel frame (which is made of plastic) to push the inner panel against the outer one. The second possible mistake is that your credit card may lose some pieces of plastic, and these might get stuck in the inner panel frame. This may lead to more pressure on the panel and lead to backlight bleeding.

Conclusion

Should you be forced to tolerate the glow of the IPS? In an ideal world, you shouldn’t, particularly if you end up getting a new screen that has a severe case of that condition. You should always examine any new monitor for flaws and get in touch with the manufacturer or seller as soon as possible, preferably while you still have time to return the monitor or while it is still covered by the warranty. But if you don’t experience any significant problems in the first few weeks, you might have a model that doesn’t have any IPS glow at all or one that’s so faint it’s nearly undetectable. In the event that it does arise, you can put these strategies to use to bring it down.

See more :

Best 29-Inch Monitors